家居日用

Door Closer 3D Models: Spring and Hydraulic STL Files

This collection gathers 3D models of door closers: spring and elastic-band mechanisms, hydraulic and overhead bodies, automatic and partial variants, plus handles and small hardware that go with them. Most entries are small mechanical assemblies, so they are useful for 3D printing practice and for repairing or adapting an existing door. Each listing shows how the parts fit together, which makes it easier to judge a design before you commit filament to it. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自5个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月11日

查看合集 查看全部52597个模型 →
合集

从这里开始

合集中的全部模型

查看全部52597个模型
关于此分类

«Door Closer 3D Models: Spring and Hydraulic STL Files»

The designs differ mainly in how they store and release force. Spring and rubber-band versions are compact, mount near the hinge and pull the leaf shut over a short arc. Hydraulic and overhead bodies are larger, sit above the door and close it more slowly, while partial closers and ajar holders only move or hold the leaf part of the way. Some models are adjustable, with a screw or a movable arm that changes the closing force.

Before printing, compare the model against your actual door. Check the hinge diameter and door thickness the author names, the arm length, and where the mounting holes fall. Look at how many separate parts there are and whether they need screws, pins or springs you have to source yourself. Read the material and settings the author lists, see whether supports are required, and study photos of real prints to judge tolerances around the pivot and the spring seat.

If the first results feel narrow, widen the wording. Try door damper, soft-close mechanism, self-closing hinge, gate closer or cabinet soft-close, and search by the part you need rather than the whole unit. Related topics such as hinges, latches, handles, counterweights and torsion springs often turn up designs that work for the same job.

FAQ

常见问题

What is the difference between a spring and a hydraulic door closer model?
Spring versions rely on a coiled spring or an elastic band and are usually small enough to sit at the hinge. Hydraulic versions imitate a fluid-damped body mounted overhead and are built from more parts, so they take longer to assemble.
What measurements should I take before printing a door closer?
Note the door thickness, the hinge pin diameter and the distance between mounting holes. Also measure the clearance above the door if the design is an overhead type, since the body needs room to swing.
Do these models need extra hardware?
Many do. Pins, screws, springs, elastic bands or small bearings are often listed by the author as separate items, so read the description and the parts list before starting a print.
Can a printed door closer be scaled up or down?
Scaling changes wall thickness and the fit of moving parts, so it usually needs adjustment of clearances rather than a single percentage change. Check the dimensions the author gives and test the pivot fit first.
相关
家居日用

Door Handle STL Models for 3D Printing

96505个模型
家居日用

Door Hinge STL Models for 3D Printing

61840个模型
家居日用

Door Roller STL Models for Sliding and Barn Doors

2949个模型
家居日用

Door Stopper 3D Models: STL Files for 3D Printing

48414个模型
家居日用

3D Models for Door Card Plugs and Trim Clips

7442个模型
物品

Door Hinge STL Models for 3D Printing

58185个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录