おもちゃ・フィギュア

LEGO Technic 3D Models: Beams, Pins and STL Parts

This collection gathers 3D models built around the LEGO Technic system: beams and liftarms, pins and axles, gears, and mounts for large car sets. It is useful when a part is missing from a build or when you want to adapt a construction to your own project. Most files are made for FDM 3D printing and come with the author's own notes on scale and orientation. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 3サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月13日

コレクションを見る モデル4126件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル4126件をすべて表示
カテゴリについて

«LEGO Technic 3D Models: Beams, Pins and STL Parts»

The models fall into a few groups. Long beams and liftarms in different stud lengths form the structural side, while pins, axles and connectors hold those beams together. Gears, motor brackets and similar mechanical parts appear as separate files, and a further group covers stands and wall mounts made for large car builds. Brick kits and multi-part sets sit at the other end, where a whole assembly is split across several STL files.

When you open a model page, look first at the stated dimensions and stud spacing, because a beam printed a fraction too thick can bind against the part next to it. Check how many separate pieces the file contains and whether they are meant to be glued or clipped together. The author's notes usually list layer height, wall count and orientation; photos of real prints show how the holes and axle openings came out. For parts that carry load, the direction of printing matters as much as the material.

If a search returns too little, try the terms used in the parts themselves: liftarm, beam, pin, axle, gear, rack, stand, mount. Adding a stud count or a tooth count narrows the list quickly, and related topics such as building blocks, construction toys or display stands often surface files that the first query missed. Spelling variants of the same word are worth trying as well, since titles are written by many different authors.

FAQ

よくある質問

How do I pick the right scale for a printed Technic part?
Compare the dimensions given on the model page with the stud spacing of the parts you already have. If the author lists a length in studs or millimetres, measure one of your own beams before printing a full set.
Why are some models split into several files?
Large beams, frames and car mounts often exceed a typical build plate, so authors cut them into sections. The page usually explains whether the sections slide together, use pins, or are meant to be joined after printing.
What should I check on a gear or drivetrain model?
Look at the tooth count, the module or pitch, and the size of the axle opening. These three values decide whether the printed part will mesh with the rest of your assembly.
Can printed parts be mixed with original ones in the same build?
That depends on the tolerances the author used, which are usually stated on the model page. Printing a single test piece first is a practical way to see how it behaves next to the parts you have.
関連
おもちゃ・フィギュア

LEGO Technic Frame STL Models for 3D Printing

モデル63288件
おもちゃ・フィギュア

LEGO Technic Panels: 3D Models and STL Files

モデル50486件
おもちゃ・フィギュア

LEGO Technic Rack Parts: 3D Models and STL Files

モデル60035件
おもちゃ・フィギュア

LEGO Technic Beam STL Models for 3D Printing

モデル33523件
おもちゃ・フィギュア

LEGO Technic Parts: 3D Models and STL Files

モデル4106件
おもちゃ・フィギュア

LEGO Technic Forklift and Beam STL Models for 3D Printing

モデル4506件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く