Brinquedos e bonecos

LEGO Technic 3D Models: Beams, Pins and STL Parts

This collection gathers 3D models built around the LEGO Technic system: beams and liftarms, pins and axles, gears, and mounts for large car sets. It is useful when a part is missing from a build or when you want to adapt a construction to your own project. Most files are made for FDM 3D printing and come with the author's own notes on scale and orientation. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 3 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 4126 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 4126 modelos
Sobre a categoria

«LEGO Technic 3D Models: Beams, Pins and STL Parts»

The models fall into a few groups. Long beams and liftarms in different stud lengths form the structural side, while pins, axles and connectors hold those beams together. Gears, motor brackets and similar mechanical parts appear as separate files, and a further group covers stands and wall mounts made for large car builds. Brick kits and multi-part sets sit at the other end, where a whole assembly is split across several STL files.

When you open a model page, look first at the stated dimensions and stud spacing, because a beam printed a fraction too thick can bind against the part next to it. Check how many separate pieces the file contains and whether they are meant to be glued or clipped together. The author's notes usually list layer height, wall count and orientation; photos of real prints show how the holes and axle openings came out. For parts that carry load, the direction of printing matters as much as the material.

If a search returns too little, try the terms used in the parts themselves: liftarm, beam, pin, axle, gear, rack, stand, mount. Adding a stud count or a tooth count narrows the list quickly, and related topics such as building blocks, construction toys or display stands often surface files that the first query missed. Spelling variants of the same word are worth trying as well, since titles are written by many different authors.

FAQ

Perguntas frequentes

How do I pick the right scale for a printed Technic part?
Compare the dimensions given on the model page with the stud spacing of the parts you already have. If the author lists a length in studs or millimetres, measure one of your own beams before printing a full set.
Why are some models split into several files?
Large beams, frames and car mounts often exceed a typical build plate, so authors cut them into sections. The page usually explains whether the sections slide together, use pins, or are meant to be joined after printing.
What should I check on a gear or drivetrain model?
Look at the tooth count, the module or pitch, and the size of the axle opening. These three values decide whether the printed part will mesh with the rest of your assembly.
Can printed parts be mixed with original ones in the same build?
That depends on the tolerances the author used, which are usually stated on the model page. Printing a single test piece first is a practical way to see how it behaves next to the parts you have.
Relacionados
Brinquedos e bonecos

LEGO Technic Frame STL Models for 3D Printing

63288 modelos
Brinquedos e bonecos

LEGO Technic Panels: 3D Models and STL Files

50486 modelos
Brinquedos e bonecos

LEGO Technic Rack Parts: 3D Models and STL Files

60035 modelos
Brinquedos e bonecos

LEGO Technic Beam STL Models for 3D Printing

33523 modelos
Brinquedos e bonecos

LEGO Technic Parts: 3D Models and STL Files

4106 modelos
Brinquedos e bonecos

LEGO Technic Forklift and Beam STL Models for 3D Printing

4506 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias