プリンターパーツ

3D Models for Printer Axes and Instrument Clock Parts

This collection gathers STL files that fall into two groups: parts for the axes of a 3D printer and housings or stands for АЧС-1 instrument clocks. Alongside them appear cable guides, bushings and small mechanical modules. It helps you find the bracket or case you need without sorting through unrelated results. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 4サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月13日

コレクションを見る モデル2152件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル2152件をすべて表示
カテゴリについて

«3D Models for Printer Axes and Instrument Clock Parts»

Axis models differ mainly by the job they do. Mounts and alignment adapters hold a dial indicator, a limit switch or a cable chain in a fixed position, while spindle and bearing upgrades replace or reinforce the Z-axis drive. Cable guides and routing parts keep wiring away from moving components, and the clock-related entries are usually housings, stands or bezels rather than mechanism parts.

When you choose a model, start with dimensions and the mounting pattern: hole spacing, screw size and the distance to the surface the part attaches to decide whether it will sit where you need it. Check how many separate pieces the author lists, whether supports are required, and which material and settings are named. Photos of real prints show how thin brackets and long guides behave in practice.

Searches on this topic mix German and Russian spellings, so it helps to try both: "Achse" for axis hardware and "АЧС-1" for the clock. Related terms such as axis mount, dial indicator holder, spindle, cable chain, bushing or clock case widen the set of results. Adding the printer model or the axis letter narrows it down again.

FAQ

よくある質問

Why do printer axis parts appear in a search for АЧС-1?
The German word "Achse" means axis, and its transliteration overlaps with the clock designation. Both spellings lead to the same result list, so axis hardware and clock housings appear side by side.
What is usually included in models for the АЧС-1 clock?
Most entries are housings, stands and bezels that hold or display the instrument clock. Mechanism parts are rare, so check the part list and dimensions on the model page.
What should I check before printing an axis mount?
Compare hole spacing, screw diameter and overall height with your machine, and see whether the author lists supports and a material. A small test print of the mounting area is a quick way to check the fit.
How do I pick a material for axis brackets?
The author's page usually names a material and settings; rigid filaments are common for brackets, while parts near heat or load may call for another choice. Read those notes before slicing.
関連
プリンターパーツ

Dust Bag and Dust Bin STL Models for 3D Printing

モデル2770件
プリンターパーツ

K2 Exhaust STL Models: Ducts, Vents and Chutes

モデル344875件
プリンターパーツ

3D Models for 4-Spool Holders and Filament Racks

モデル12692件
プリンターパーツ

3D Models with Side Pins and Pin-Based Parts

モデル11240件
プリンターパーツ

Heater Flap and Vent STL Models for 3D Printing

モデル5823件
プリンターパーツ

Thin Plate 3D Models: STL Files for Flat Parts

モデル2126337件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く