打印机配件

3D Models for Printer Axes and Instrument Clock Parts

This collection gathers STL files that fall into two groups: parts for the axes of a 3D printer and housings or stands for АЧС-1 instrument clocks. Alongside them appear cable guides, bushings and small mechanical modules. It helps you find the bracket or case you need without sorting through unrelated results. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自4个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月13日

查看合集 查看全部2152个模型 →
合集

从这里开始

合集中的全部模型

查看全部2152个模型
关于此分类

«3D Models for Printer Axes and Instrument Clock Parts»

Axis models differ mainly by the job they do. Mounts and alignment adapters hold a dial indicator, a limit switch or a cable chain in a fixed position, while spindle and bearing upgrades replace or reinforce the Z-axis drive. Cable guides and routing parts keep wiring away from moving components, and the clock-related entries are usually housings, stands or bezels rather than mechanism parts.

When you choose a model, start with dimensions and the mounting pattern: hole spacing, screw size and the distance to the surface the part attaches to decide whether it will sit where you need it. Check how many separate pieces the author lists, whether supports are required, and which material and settings are named. Photos of real prints show how thin brackets and long guides behave in practice.

Searches on this topic mix German and Russian spellings, so it helps to try both: "Achse" for axis hardware and "АЧС-1" for the clock. Related terms such as axis mount, dial indicator holder, spindle, cable chain, bushing or clock case widen the set of results. Adding the printer model or the axis letter narrows it down again.

FAQ

常见问题

Why do printer axis parts appear in a search for АЧС-1?
The German word "Achse" means axis, and its transliteration overlaps with the clock designation. Both spellings lead to the same result list, so axis hardware and clock housings appear side by side.
What is usually included in models for the АЧС-1 clock?
Most entries are housings, stands and bezels that hold or display the instrument clock. Mechanism parts are rare, so check the part list and dimensions on the model page.
What should I check before printing an axis mount?
Compare hole spacing, screw diameter and overall height with your machine, and see whether the author lists supports and a material. A small test print of the mounting area is a quick way to check the fit.
How do I pick a material for axis brackets?
The author's page usually names a material and settings; rigid filaments are common for brackets, while parts near heat or load may call for another choice. Read those notes before slicing.
相关
打印机配件

Dust Bag and Dust Bin STL Models for 3D Printing

2770个模型
打印机配件

K2 Exhaust STL Models: Ducts, Vents and Chutes

344875个模型
打印机配件

3D Models for 4-Spool Holders and Filament Racks

12692个模型
打印机配件

3D Models with Side Pins and Pin-Based Parts

11240个模型
打印机配件

Heater Flap and Vent STL Models for 3D Printing

5823个模型
打印机配件

Thin Plate 3D Models: STL Files for Flat Parts

2126337个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录