Peças para impressoras

3D Models for Printer Axes and Instrument Clock Parts

This collection gathers STL files that fall into two groups: parts for the axes of a 3D printer and housings or stands for АЧС-1 instrument clocks. Alongside them appear cable guides, bushings and small mechanical modules. It helps you find the bracket or case you need without sorting through unrelated results. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 2152 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 2152 modelos
Sobre a categoria

«3D Models for Printer Axes and Instrument Clock Parts»

Axis models differ mainly by the job they do. Mounts and alignment adapters hold a dial indicator, a limit switch or a cable chain in a fixed position, while spindle and bearing upgrades replace or reinforce the Z-axis drive. Cable guides and routing parts keep wiring away from moving components, and the clock-related entries are usually housings, stands or bezels rather than mechanism parts.

When you choose a model, start with dimensions and the mounting pattern: hole spacing, screw size and the distance to the surface the part attaches to decide whether it will sit where you need it. Check how many separate pieces the author lists, whether supports are required, and which material and settings are named. Photos of real prints show how thin brackets and long guides behave in practice.

Searches on this topic mix German and Russian spellings, so it helps to try both: "Achse" for axis hardware and "АЧС-1" for the clock. Related terms such as axis mount, dial indicator holder, spindle, cable chain, bushing or clock case widen the set of results. Adding the printer model or the axis letter narrows it down again.

FAQ

Perguntas frequentes

Why do printer axis parts appear in a search for АЧС-1?
The German word "Achse" means axis, and its transliteration overlaps with the clock designation. Both spellings lead to the same result list, so axis hardware and clock housings appear side by side.
What is usually included in models for the АЧС-1 clock?
Most entries are housings, stands and bezels that hold or display the instrument clock. Mechanism parts are rare, so check the part list and dimensions on the model page.
What should I check before printing an axis mount?
Compare hole spacing, screw diameter and overall height with your machine, and see whether the author lists supports and a material. A small test print of the mounting area is a quick way to check the fit.
How do I pick a material for axis brackets?
The author's page usually names a material and settings; rigid filaments are common for brackets, while parts near heat or load may call for another choice. Read those notes before slicing.
Relacionados
Peças para impressoras

Dust Bag and Dust Bin STL Models for 3D Printing

2770 modelos
Peças para impressoras

K2 Exhaust STL Models: Ducts, Vents and Chutes

344875 modelos
Peças para impressoras

3D Models for 4-Spool Holders and Filament Racks

12692 modelos
Peças para impressoras

3D Models with Side Pins and Pin-Based Parts

11240 modelos
Peças para impressoras

Heater Flap and Vent STL Models for 3D Printing

5823 modelos
Peças para impressoras

Thin Plate 3D Models: STL Files for Flat Parts

2126337 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias