スポーツ・フィットネス

Bicycle Protector 3D Models: Guards and Covers to Print

This collection gathers STL files for parts that shield a bicycle: drivetrain guards, mudguards, hub and axle plugs, frame and rack covers. The models differ in how they attach, so the collection is useful when you want a small replacement or a custom cover rather than a stock part. Each entry is a starting point for 3D printing, and the fit depends on the dimensions of your own bike. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル47件 6サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月10日

コレクションを見る モデル50307件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル50307件をすべて表示
カテゴリについて

«Bicycle Protector 3D Models: Guards and Covers to Print»

The most common group covers the drivetrain: chain guards, chainring covers and crank protectors, often shaped around a specific chainline or a children's bike. A second group deals with dirt and spray, from full mudguards to small splash guards that clip near the rear wheel. Transport and storage parts form a third group: hub and axle plugs, rim protectors and wheel spacers that keep parts apart while a bike is packed or carried on a rack.

When choosing a model, read the author's page for the stated dimensions and scale, the number of separate parts and how they join, and whether supports are needed for the overhangs. Check the material and print settings the author lists, since a thin clip and a thick guard behave differently in the same filament. Photos of real prints are the quickest way to judge wall thickness, tolerances and how the part sits on the frame.

To widen the results, try synonyms: guard, cover, shield, sleeve, plug, spacer, mudguard or fender, and combine them with the part of the bike, such as chain, crank, hub, axle, downtube, rack or pannier. Related searches include bike stand parts, wheel shipping spacers and clip-on accessories. Narrowing by mounting type or by tube diameter usually removes models that will not fit your frame.

FAQ

よくある質問

What do I need to measure before printing a bicycle protector?
Measure the tube or component the part wraps around, the available clearance to moving parts, and the thickness of any material it must pass over. Compare those numbers with the dimensions listed on the model page.
Which filament is used for these parts?
Authors usually state a material and settings on the model page. Rigid guards and flexible clips are often printed in different filaments, so follow the notes for the specific model rather than one general rule.
Do these models need supports?
It depends on the shape: flat guards and plugs often print without them, while curved covers with overhangs may need them. The model page or the included files usually indicate the intended orientation.
Can a printed protector replace an original part?
It can serve as a replacement when the dimensions match, but the fit depends on your bike and on print tolerances. Test the part before relying on it and adjust the scale if needed.
関連
スポーツ・フィットネス

Bicycle Lock Mounts and Holders: STL Models

モデル3276件
スポーツ・フィットネス

Bicycle Wing 3D Models and STL Files

モデル46464件
スポーツ・フィットネス

Bicycle Mudguard STL Models for 3D Printing

モデル40803件
スポーツ・フィットネス

3D Models for Bicycle Bells and Mounts

モデル2515件
スポーツ・フィットネス

Bicycle Stanchion 3D Models and STL Parts

モデル1162件
スポーツ・フィットネス

Bicycle Fork 3D Models and STL Parts to Print

モデル2928件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く