运动健身

Bicycle Protector 3D Models: Guards and Covers to Print

This collection gathers STL files for parts that shield a bicycle: drivetrain guards, mudguards, hub and axle plugs, frame and rack covers. The models differ in how they attach, so the collection is useful when you want a small replacement or a custom cover rather than a stock part. Each entry is a starting point for 3D printing, and the fit depends on the dimensions of your own bike. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 47个模型 来自6个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月10日

查看合集 查看全部50307个模型 →
合集

从这里开始

合集中的全部模型

查看全部50307个模型
关于此分类

«Bicycle Protector 3D Models: Guards and Covers to Print»

The most common group covers the drivetrain: chain guards, chainring covers and crank protectors, often shaped around a specific chainline or a children's bike. A second group deals with dirt and spray, from full mudguards to small splash guards that clip near the rear wheel. Transport and storage parts form a third group: hub and axle plugs, rim protectors and wheel spacers that keep parts apart while a bike is packed or carried on a rack.

When choosing a model, read the author's page for the stated dimensions and scale, the number of separate parts and how they join, and whether supports are needed for the overhangs. Check the material and print settings the author lists, since a thin clip and a thick guard behave differently in the same filament. Photos of real prints are the quickest way to judge wall thickness, tolerances and how the part sits on the frame.

To widen the results, try synonyms: guard, cover, shield, sleeve, plug, spacer, mudguard or fender, and combine them with the part of the bike, such as chain, crank, hub, axle, downtube, rack or pannier. Related searches include bike stand parts, wheel shipping spacers and clip-on accessories. Narrowing by mounting type or by tube diameter usually removes models that will not fit your frame.

FAQ

常见问题

What do I need to measure before printing a bicycle protector?
Measure the tube or component the part wraps around, the available clearance to moving parts, and the thickness of any material it must pass over. Compare those numbers with the dimensions listed on the model page.
Which filament is used for these parts?
Authors usually state a material and settings on the model page. Rigid guards and flexible clips are often printed in different filaments, so follow the notes for the specific model rather than one general rule.
Do these models need supports?
It depends on the shape: flat guards and plugs often print without them, while curved covers with overhangs may need them. The model page or the included files usually indicate the intended orientation.
Can a printed protector replace an original part?
It can serve as a replacement when the dimensions match, but the fit depends on your bike and on print tolerances. Test the part before relying on it and adjust the scale if needed.
相关
运动健身

Bicycle Lock Mounts and Holders: STL Models

3276个模型
运动健身

Bicycle Wing 3D Models and STL Files

46464个模型
运动健身

Bicycle Mudguard STL Models for 3D Printing

40803个模型
运动健身

3D Models for Bicycle Bells and Mounts

2515个模型
运动健身

Bicycle Stanchion 3D Models and STL Parts

1162个模型
运动健身

Bicycle Fork 3D Models and STL Parts to Print

2928个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录