Esportes e fitness

Bicycle Protector 3D Models: Guards and Covers to Print

This collection gathers STL files for parts that shield a bicycle: drivetrain guards, mudguards, hub and axle plugs, frame and rack covers. The models differ in how they attach, so the collection is useful when you want a small replacement or a custom cover rather than a stock part. Each entry is a starting point for 3D printing, and the fit depends on the dimensions of your own bike. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 47 modelos de 6 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 10/10/2026

Ver a coleção Mostrar todos: 50307 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 50307 modelos
Sobre a categoria

«Bicycle Protector 3D Models: Guards and Covers to Print»

The most common group covers the drivetrain: chain guards, chainring covers and crank protectors, often shaped around a specific chainline or a children's bike. A second group deals with dirt and spray, from full mudguards to small splash guards that clip near the rear wheel. Transport and storage parts form a third group: hub and axle plugs, rim protectors and wheel spacers that keep parts apart while a bike is packed or carried on a rack.

When choosing a model, read the author's page for the stated dimensions and scale, the number of separate parts and how they join, and whether supports are needed for the overhangs. Check the material and print settings the author lists, since a thin clip and a thick guard behave differently in the same filament. Photos of real prints are the quickest way to judge wall thickness, tolerances and how the part sits on the frame.

To widen the results, try synonyms: guard, cover, shield, sleeve, plug, spacer, mudguard or fender, and combine them with the part of the bike, such as chain, crank, hub, axle, downtube, rack or pannier. Related searches include bike stand parts, wheel shipping spacers and clip-on accessories. Narrowing by mounting type or by tube diameter usually removes models that will not fit your frame.

FAQ

Perguntas frequentes

What do I need to measure before printing a bicycle protector?
Measure the tube or component the part wraps around, the available clearance to moving parts, and the thickness of any material it must pass over. Compare those numbers with the dimensions listed on the model page.
Which filament is used for these parts?
Authors usually state a material and settings on the model page. Rigid guards and flexible clips are often printed in different filaments, so follow the notes for the specific model rather than one general rule.
Do these models need supports?
It depends on the shape: flat guards and plugs often print without them, while curved covers with overhangs may need them. The model page or the included files usually indicate the intended orientation.
Can a printed protector replace an original part?
It can serve as a replacement when the dimensions match, but the fit depends on your bike and on print tolerances. Test the part before relying on it and adjust the scale if needed.
Relacionados
Esportes e fitness

Bicycle Lock Mounts and Holders: STL Models

3276 modelos
Esportes e fitness

Bicycle Wing 3D Models and STL Files

46464 modelos
Esportes e fitness

Bicycle Mudguard STL Models for 3D Printing

40803 modelos
Esportes e fitness

3D Models for Bicycle Bells and Mounts

2515 modelos
Esportes e fitness

Bicycle Stanchion 3D Models and STL Parts

1162 modelos
Esportes e fitness

Bicycle Fork 3D Models and STL Parts to Print

2928 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias