電子工作

Drone Platform 3D Models: STL Launch and Landing Pads

This collection gathers 3D printing models built around drones: take-off and landing surfaces, payload mounts, folding plates and airframe parts. Most files are plain STL geometry, so the printed result depends on the scale and settings you choose. It is a starting point for anyone who wants a pad, a mount or a test frame rather than a full aircraft. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル47件 8サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月14日

コレクションを見る モデル32569件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル32569件をすべて表示
カテゴリについて

«Drone Platform 3D Models: STL Launch and Landing Pads»

The models fall into a few groups. Launch and landing platforms are flat surfaces, sometimes with anchors, raised edges or markings that help position a drone. Payload and accessory platforms are shaped around a particular airframe and hold a camera, a battery or a sensor. Folding plates and compact pads are meant to be carried, so they are printed as several pieces that join together. Airframe and test platforms sit closer to a frame: arms, plates and mounting points rather than a finished flying machine.

Before printing, read the author's page for the dimensions and the number of parts. A landing pad only works if its surface is wide enough for the propellers and the legs, so compare the stated size with your own drone. Check whether the model needs supports, how the pieces connect, and which material and layer height the author lists. For outdoor use, look at photos of real prints to judge how thin walls and joints behave, and consider a filament that tolerates moisture and sun.

Search results improve when you try different wording. "Launch platform", "landing pad", "helipad" and "take-off plate" describe similar objects, while "payload mount", "camera bracket" and "GPS mount" cover the attachment side. If you are after a frame, try "airframe", "test platform" or "quadcopter frame". Related topics such as FPV accessories, drone cases, antenna holders and tabletop terrain often contain parts that fit the same builds.

FAQ

よくある質問

Do drone landing pads need supports when printed?
It depends on the geometry. Flat pads with small feet or anchors usually print without them, while raised rings, hollow legs and overhanging edges may need support. The author's page normally states what the model was sliced with.
How large should a printed launch platform be?
Wide enough that the propellers clear the surface and the legs sit fully on it. Measure your drone first, then compare that figure with the dimensions given on the model page, and scale the file if your slicer allows it.
Can a folding drone pad be printed in several pieces?
Yes, folding and compact pads are often split into plates and hinges that are joined after printing. Check how the parts connect, whether pins or screws are required, and how the joint holds up when the pad is opened and closed repeatedly.
Which filament works for a pad used outdoors?
Look at what the author lists and how the model is loaded. Parts left in the sun and damp grass tend to need a filament with better UV and moisture resistance than standard PLA, while indoor pads are less demanding.
関連
ガジェット

3D printing models of drones and quadcopters

モデル42172件
ミニチュア・ウォーゲーム

3D Models for Display Platforms and Stands

モデル12925件
ガジェット

Altimeter Platform 3D Models and Mounts

モデル5107件
ガジェット

Drone Stand 3D Models: STL Files for Display and Storage

モデル505001件
工具・機材

Drone Mount 3D Models: STL Brackets and Holders

モデル12670件
ガジェット

Drone Keychain 3D Models: FPV, Mini and Pilot STLs

モデル200741件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く