电子产品

Drone Platform 3D Models: STL Launch and Landing Pads

This collection gathers 3D printing models built around drones: take-off and landing surfaces, payload mounts, folding plates and airframe parts. Most files are plain STL geometry, so the printed result depends on the scale and settings you choose. It is a starting point for anyone who wants a pad, a mount or a test frame rather than a full aircraft. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 47个模型 来自8个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月14日

查看合集 查看全部32569个模型 →
合集

从这里开始

合集中的全部模型

查看全部32569个模型
关于此分类

«Drone Platform 3D Models: STL Launch and Landing Pads»

The models fall into a few groups. Launch and landing platforms are flat surfaces, sometimes with anchors, raised edges or markings that help position a drone. Payload and accessory platforms are shaped around a particular airframe and hold a camera, a battery or a sensor. Folding plates and compact pads are meant to be carried, so they are printed as several pieces that join together. Airframe and test platforms sit closer to a frame: arms, plates and mounting points rather than a finished flying machine.

Before printing, read the author's page for the dimensions and the number of parts. A landing pad only works if its surface is wide enough for the propellers and the legs, so compare the stated size with your own drone. Check whether the model needs supports, how the pieces connect, and which material and layer height the author lists. For outdoor use, look at photos of real prints to judge how thin walls and joints behave, and consider a filament that tolerates moisture and sun.

Search results improve when you try different wording. "Launch platform", "landing pad", "helipad" and "take-off plate" describe similar objects, while "payload mount", "camera bracket" and "GPS mount" cover the attachment side. If you are after a frame, try "airframe", "test platform" or "quadcopter frame". Related topics such as FPV accessories, drone cases, antenna holders and tabletop terrain often contain parts that fit the same builds.

FAQ

常见问题

Do drone landing pads need supports when printed?
It depends on the geometry. Flat pads with small feet or anchors usually print without them, while raised rings, hollow legs and overhanging edges may need support. The author's page normally states what the model was sliced with.
How large should a printed launch platform be?
Wide enough that the propellers clear the surface and the legs sit fully on it. Measure your drone first, then compare that figure with the dimensions given on the model page, and scale the file if your slicer allows it.
Can a folding drone pad be printed in several pieces?
Yes, folding and compact pads are often split into plates and hinges that are joined after printing. Check how the parts connect, whether pins or screws are required, and how the joint holds up when the pad is opened and closed repeatedly.
Which filament works for a pad used outdoors?
Look at what the author lists and how the model is loaded. Parts left in the sun and damp grass tend to need a filament with better UV and moisture resistance than standard PLA, while indoor pads are less demanding.
相关
数码配件

3D printing models of drones and quadcopters

42172个模型
微缩模型与战棋

3D Models for Display Platforms and Stands

12925个模型
数码配件

Altimeter Platform 3D Models and Mounts

5107个模型
数码配件

Drone Stand 3D Models: STL Files for Display and Storage

505001个模型
工具与设备

Drone Mount 3D Models: STL Brackets and Holders

12670个模型
数码配件

Drone Keychain 3D Models: FPV, Mini and Pilot STLs

200741个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录