Eletrônica

3D Models for XT60 and Rear Drone Mounts

The collection covers XT60 connector holders, antenna mounts, rear brackets for FPV frames, and a few 3D printer accessory mounts. It is useful when you need a small STL part to route power or antennas on a drone build. You can also find battery holders and frame-specific rear mounts. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 3 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 2698 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 2698 modelos
Sobre a categoria

«3D Models for XT60 and Rear Drone Mounts»

The XT60 holders vary by how the connector is retained, whether the part is a simple bracket or a full rear mount, and how the wires exit. Antenna mounts often share the same rear section and may include space for a connector or an antenna tube. Printer-side holders in the reference are a separate group: spool holders, cable guides, and toolhead mounts that follow a different mounting logic.

Before printing, check the model page for the stated dimensions, screw hole spacing, and the number of separate parts. Look at whether the author shows supports, print orientation, material, and photos of a finished print. For drone parts, check the frame size and the connector type listed by the author.

To narrow the search, combine the connector name with the part role, such as XT60 holder, rear mount, antenna bracket, or battery tray. Related terms include power connector mount, drone rear bracket, and FPV frame accessory. If you are looking for printer parts, use terms like spool holder, cable guide, or toolhead mount instead.

FAQ

Perguntas frequentes

What is an XT60 rear holder used for on an FPV frame?
It holds the XT60 power connector at the rear of the frame and keeps the battery lead routed away from the props. The exact shape depends on the frame and the connector orientation.
How do I choose between an antenna mount and a combined rear mount?
A separate antenna mount only carries the antenna, while a combined rear mount may also hold the XT60 connector or a video transmitter. Check the part list and mounting points on the model page.
What should I check before printing a drone mount?
Review the dimensions, screw spacing, and any listed material or layer height. Look for photos of the printed part and notes about supports or orientation.
Can I adapt a holder designed for one frame to another?
You can scale or modify the STL if the mounting pattern allows it, but the connector cutout and screw holes may need changes. Start from the dimensions on the author's page.
Relacionados
Eletrônica

GEPRC Mark4 3D Printing Parts and STL Files

3037 modelos
Eletrônica

Mark 4 3D Models: Drone Frames, Props and Parts

378051 modelos
Eletrônica

FPV Drone Antenna Mount 3D Models and STL Brackets

2736 modelos
Eletrônica

XT60 and USB-C 3D Printing Models to Browse

73089 modelos
Eletrônica

XT60 and USB-C Adapters: 3D Models and STL Files

66260 modelos
Eletrônica

FPV Mark4 V2 3D Models: Mounts, Plates and TPU Parts

3343 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias