电子产品

3D Models for XT60 and Rear Drone Mounts

The collection covers XT60 connector holders, antenna mounts, rear brackets for FPV frames, and a few 3D printer accessory mounts. It is useful when you need a small STL part to route power or antennas on a drone build. You can also find battery holders and frame-specific rear mounts. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自3个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月13日

查看合集 查看全部2698个模型 →
合集

从这里开始

合集中的全部模型

查看全部2698个模型
关于此分类

«3D Models for XT60 and Rear Drone Mounts»

The XT60 holders vary by how the connector is retained, whether the part is a simple bracket or a full rear mount, and how the wires exit. Antenna mounts often share the same rear section and may include space for a connector or an antenna tube. Printer-side holders in the reference are a separate group: spool holders, cable guides, and toolhead mounts that follow a different mounting logic.

Before printing, check the model page for the stated dimensions, screw hole spacing, and the number of separate parts. Look at whether the author shows supports, print orientation, material, and photos of a finished print. For drone parts, check the frame size and the connector type listed by the author.

To narrow the search, combine the connector name with the part role, such as XT60 holder, rear mount, antenna bracket, or battery tray. Related terms include power connector mount, drone rear bracket, and FPV frame accessory. If you are looking for printer parts, use terms like spool holder, cable guide, or toolhead mount instead.

FAQ

常见问题

What is an XT60 rear holder used for on an FPV frame?
It holds the XT60 power connector at the rear of the frame and keeps the battery lead routed away from the props. The exact shape depends on the frame and the connector orientation.
How do I choose between an antenna mount and a combined rear mount?
A separate antenna mount only carries the antenna, while a combined rear mount may also hold the XT60 connector or a video transmitter. Check the part list and mounting points on the model page.
What should I check before printing a drone mount?
Review the dimensions, screw spacing, and any listed material or layer height. Look for photos of the printed part and notes about supports or orientation.
Can I adapt a holder designed for one frame to another?
You can scale or modify the STL if the mounting pattern allows it, but the connector cutout and screw holes may need changes. Start from the dimensions on the author's page.
相关
电子产品

GEPRC Mark4 3D Printing Parts and STL Files

3037个模型
电子产品

Mark 4 3D Models: Drone Frames, Props and Parts

378051个模型
电子产品

FPV Drone Antenna Mount 3D Models and STL Brackets

2736个模型
电子产品

XT60 and USB-C 3D Printing Models to Browse

73089个模型
电子产品

XT60 and USB-C Adapters: 3D Models and STL Files

66260个模型
电子产品

FPV Mark4 V2 3D Models: Mounts, Plates and TPU Parts

3343个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录