Casa e utilidades

3D Printed Installation Housings and Mounting Boxes STL

This collection gathers 3D models that hold, cover or mount something else: electrical boxes, enclosures for small devices, bearing housings and trim inserts. Most of them are designed around a specific component, so the printed part is only useful once its dimensions match. It is a practical starting point if you already know what has to fit inside and where it will be fixed. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 47 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 14/10/2026

Ver a coleção Mostrar todos: 2646 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 2646 modelos
Sobre a categoria

«3D Printed Installation Housings and Mounting Boxes STL»

The parts differ mainly in what they are built around. Installation boxes and cable ducts are shaped by a wall opening or a standard frame, device enclosures follow the outline of a meter, controller or board, and bearing housings are defined by shaft diameter and bolt spacing. Automotive inserts and display shells sit somewhere between a cover and a bracket, so they often combine a visible face with hidden fixing points.

Before printing, compare the model dimensions with the real component and with the cutout it has to pass through. Look at wall thickness, screw boss positions, lid or snap-fit design, and whether the author shows supports, orientation, material and settings. Photos of finished prints are more informative than renders, especially for thin walls and close tolerances.

If the first search gives little, try other words for the same object: enclosure, case, box, housing, mount, bracket, holder, adapter, bezel, faceplate, junction box or cable gland. Related topics such as cable management, panel cutouts, DIN rail mounting or printer carriage parts often lead to models with the same fixing logic. Changing the component name or the mounting standard usually widens the results more than changing the printer name.

FAQ

Perguntas frequentes

How do I pick a housing that fits my component?
Measure the component and the opening it must sit in, then compare those figures with the dimensions given on the model page. Pay attention to internal clearance, wall thickness and the position of screw holes or clips.
Do installation housings need supports?
It depends on the shape and the orientation you choose. Flat-backed boxes often print without them, while models with overhanging lids, cable entries or recessed openings may need them. The author's notes usually say which orientation was used.
Which material is used for these parts?
Authors list different materials depending on the job: rigid filaments for brackets and housings, tougher ones for parts that flex or take load. Check the listed settings, and follow local rules where a printed part is used near mains wiring.
Can I adapt a model to a different device?
Yes, if the geometry allows scaling or editing. Check that wall thickness, screw positions and connector openings still work after the change, and re-measure the component before printing.
Relacionados
Eletrônica

3D Models for Housing and Enclosure Parts

19076 modelos
Ferramentas e equipamentos

3D Models for Installation Work: STL Tools and Jigs

12831 modelos
Veículos

3D Models for Fog Light Housings and Mounts

180364 modelos
Objetos

3D Models for Speaker Housings and Enclosures

3207 modelos
Veículos

Fog Light Housings: 3D Models and STL Files

163164 modelos
Veículos

3D Printed Fog Light Housings and Covers for Cars

12795 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias