Alet ve ekipman

Cabinet Jigs: 3D-Printed STL Models for Woodworking

This collection gathers STL models that act as jigs and guides for cabinet work: handle drilling templates, hinge boring aids, assembly squares and door alignment helpers. They are made for 3D printing, so a workshop can produce a template in the size its own boards and hardware require. The range is broad, from small drilling guides to larger assembly frames. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 2553 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2553 model
Kategori hakkında

«Cabinet Jigs: 3D-Printed STL Models for Woodworking»

The models differ mainly in the operation they support. Handle and pull jigs fix the spacing and offset of knob or bar holes across a run of doors, while hinge jigs control the cup diameter and bore distance for concealed hinges. Assembly jigs hold boards of a given thickness at a right angle during glue-up, and door helpers keep a panel flush or level while the mounting screws go in. Some entries are simple drill guides with one fixed offset, others are multi-part frames with clamps or inserts.

When choosing a model, read the author's page rather than the thumbnail. Check the board thickness the jig is dimensioned for, the drill or bushing diameter it expects, and the hole spacing it produces, since these decide whether the template matches your hardware. Look at whether the model is split into parts, how they join, and whether supports or extra fasteners are needed. The material and slicer settings the author lists, together with photos of real prints, tell you more about the result than the render does.

Search results widen quickly if you vary the wording. Besides "jig", try "drilling template", "drill guide", "boring jig", "hardware template" or "assembly square". Related terms such as pocket hole, dowel, shelf pin, hinge cup or cabinet scraper sharpening lead to other workshop aids in the same style. Adding a dimension to the query, for example 18 mm, 3/4 inch or a specific offset, narrows the list to models built around that measurement.

FAQ

Sıkça sorulan sorular

What does a cabinet jig model actually do?
It is a printed template that positions a drill, a hinge cup or a board so repeated holes and joints land in the same place. Most entries in this collection cover handle drilling, hinge boring, corner assembly or door alignment.
Which measurements should I check before printing a jig?
Look at the board thickness the model is drawn for, the hole spacing or offset it sets, and the drill or bushing diameter it accepts. These three values decide whether the printed part matches your hardware and panels.
Do these jigs need supports?
It depends on the geometry. Flat plates with vertical holes usually print without them, while models with overhangs, clamps or recessed pockets may need supports or a different orientation; the author's page usually states which.
Can I resize a jig model for another board thickness?
Scaling changes every dimension at once, including hole diameters and bushing seats, so a scaled copy may no longer hold the drill or fit the hardware. It is better to look for a version drawn for that thickness.
İlgili
Alet ve ekipman

3D Models for Workshop Jigs and Guides

11710 model
Ev ve yaşam

STL Files for Cabinet Parts and Miniature Cabinets

9758 model
Alet ve ekipman

3D Models for Bolt Cabinets and Hardware Storage

2816 model
Ev ve yaşam

Cabinet and Drawer Handle STL Models

65985 model
Alet ve ekipman

Furniture Drilling Jig STL Models for 3D Printing

63007 model
Minyatürler ve savaş oyunları

Mini Wardrobe 3D Models: Dollhouse, Jewelry, STL

2915 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç