Alet ve ekipman

FPV Drone Mounts: STL Files for 5- and 10-Inch Frames

This collection gathers STL files for mounts that fit common FPV drone frame sizes. You will find camera holders, GPS and antenna brackets, side plates, and replacement mounts. It is useful when you need to adapt a frame to a specific camera or antenna layout. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 12408 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 12408 model
Kategori hakkında

«FPV Drone Mounts: STL Files for 5- and 10-Inch Frames»

The reference shows several mount families: camera mounts for action cameras and digital air units, GPS and antenna holders, frame side plates, and replacement brackets. Some are designed around a single frame size, while others are listed for a specific camera or antenna type. Rack-mount brackets for small computers also appear, which differ from drone parts in both scale and mounting method.

Before printing, check the model page for the frame size, hole spacing, and the camera or antenna it is meant to hold. Look at the number of parts, whether supports are needed, and the material and settings the author lists. Photos of real prints can show how the mount sits on a frame and whether the cable routing has enough room.

To narrow the results, try synonyms such as bracket, holder, plate, and adapter, and combine them with frame size or camera type. Related searches include FPV camera mount, GPS mount, antenna holder, and replacement frame parts. If you are looking for computer hardware, use rack-mount and rack bracket terms to separate those results from drone parts.

FAQ

Sıkça sorulan sorular

What should I check before printing an FPV drone mount?
Check frame size, hole spacing, camera or antenna dimensions, and the author's recommended material and settings. Photos of real prints help confirm fit.
How do I know if a mount fits a 5-inch or 10-inch frame?
The model page usually lists the frame size and mounting pattern. Compare those dimensions with your frame before printing.
Can I use a camera mount with a different camera than listed?
Only if the mounting holes and clearances match. The author's page may note which camera or air unit the mount was designed around.
What terms help find related mounts?
Try bracket, holder, side plate, adapter, GPS mount, antenna mount, or replacement mount. Adding the frame size or camera type narrows the list.
İlgili
Nesneler

Mark4 Drone Mount 3D Models and STL Files

664776 model
Askeri

Mark 5 Mount STL Files for 3D Printing

665313 model
Alet ve ekipman

3D Models for Mark4 5-Inch Mounts and FPV Gear

673360 model
Askeri

3D Models for 5-Inch FPV Drone Mounts

3279 model
Alet ve ekipman

3D Printing Mounts for FPV Drone Frames

1378200 model
Elektronik

3D Printing Mounts for Mark 4 V2 FPV Frames

5154 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç