Askeri

3D Models for 5-Inch FPV Drone Mounts

This collection gathers STL files for mounts used on FPV drone frames, from SMA antenna holders to GPS, ELRS and camera brackets. It is useful when you need a replacement or custom part for a 3D printing project around a drone build. Check each model page for the author's dimensions and assembly notes. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 3279 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 3279 model
Kategori hakkında

«3D Models for 5-Inch FPV Drone Mounts»

The collection includes antenna mounts for SMA and RP-SMA connectors, separate holders for GPS and ELRS receivers, camera brackets, and small brackets for power connectors or buzzers. Some parts are single-piece brackets, while others combine several functions in one mount. Designs differ by frame size, mounting hole pattern, and whether the antenna sits at an angle or straight.

Before printing, open the model page and check the listed dimensions, screw sizes, and the number of parts. Look at the author's photos of printed examples to judge wall thickness and how cables will route. Confirm whether the design needs supports and which material and settings the author recommends.

To narrow the results, try terms such as antenna holder, GPS mount, receiver bracket, camera bracket, or XT60 holder. Adding your frame size, connector type, or module name can reduce unrelated results. Related searches include FPV drone accessories, frame spare parts, and 3D printed mounts for radio control gear.

FAQ

Sıkça sorulan sorular

What types of mounts are included in this collection?
The collection covers SMA antenna mounts, GPS and ELRS receiver holders, camera brackets, and small accessory mounts for FPV drone frames. Each design is made for a particular frame layout or connector type.
How do I choose the right mount for my frame?
Compare the mounting hole spacing, frame thickness, and connector position on your frame with the dimensions on the model page. Check the author's photos and notes to see how the part fits around existing components.
Do these mounts need supports when printing?
Some designs print without supports, while others include overhangs that may need them. The model page usually states the author's print orientation and support settings.
Can I adapt a mount for a different antenna or module?
You can scale or edit the model if the file is available for modification, but check that screw holes and cable paths still line up. Small changes to hole size or angle may require reprinting a test piece.
İlgili
Askeri

Mark 5 Mount STL Files for 3D Printing

665313 model
Nesneler

Mark4 Drone Mount 3D Models and STL Files

664776 model
Alet ve ekipman

3D Models for Mark4 5-Inch Mounts and FPV Gear

673360 model
Alet ve ekipman

FPV Drone Mounts: STL Files for 5- and 10-Inch Frames

12408 model
Elektronik

3D Printing Mounts for Mark 4 V2 FPV Frames

5154 model
Elektronik

ELRS Antenna Mounts for Mark 4 V2: STL Files

5721 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç