工具与设备

Cyclone 110 mm STL Models for Dust Separators

This collection gathers STL files for cyclone separators and related 110 mm fittings used in dust extraction. You will find adapters, lids, and pipe connections that can be printed on a common 3D printer. It helps you match a separator to a vacuum, barrel, or workshop hose without guessing at dimensions. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 47个模型 来自8个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月10日

查看合集 查看全部181587个模型 →
合集

从这里开始

合集中的全部模型

查看全部181587个模型
关于此分类

«Cyclone 110 mm STL Models for Dust Separators»

Cyclone parts in this size range usually fall into separator bodies, lid and barrel adapters, and hose or pipe connectors. Some are designed around a specific container thread or rim, while others are open for a custom lid or drum. There are also smaller cyclonic filters and exhaust or fan transitions that use the same nominal diameter.

When choosing a model, check the stated inlet and outlet diameters, the wall thickness, and how the parts join. Look at whether the author expects supports, screws, gaskets, or glue, and which filament and layer height are listed. Photos of real prints can show how the threads and tapers fit in practice.

To refine the search, try synonyms such as dust separator, sawdust extractor, cyclonic filter, and vacuum adapter. Related terms include 100 mm reducer, pipe clip, barrel lid, and workshop dust collection. Combining those terms with the diameter you need usually narrows the results to parts that match your setup.

FAQ

常见问题

What is a 110 mm cyclone used for?
It is a separator that uses a vortex to drop dust and chips out of an air stream before they reach a vacuum or extractor. The 110 mm size usually refers to the main pipe or hose connection.
How do I know which adapter fits my container?
Check the container opening, thread, and rim dimensions, then compare them with the model's stated measurements. A printed test ring or a short section can help confirm the fit.
Do cyclone separators need supports when printed?
It depends on the geometry: overhangs inside the cone and around ports may need supports or a different print orientation. The author's page often notes the intended orientation and support use.
Can I scale a 110 mm cyclone model to another diameter?
Scaling changes wall thickness and thread fit, so it may not match standard pipes. It is usually better to look for a model already drawn for your target diameter.
相关
综合搜索

Cyclone 3D Models for Dust Collectors and More

13382个模型
工具与设备

Cyclone Nozzle 3D Models for Dust and Airflow

24116个模型
工具与设备

Cyclone Filter STL Models for Dust Separation

16887个模型
工具与设备

Cyclone Bucket Separator STL Models for Dust Collection

8525个模型
打印机配件

3D Models for 110 mm Air Filter Adapters

37686个模型
科学与教育

Cyclone Dust Separator STL Models for 3D Printing

1429个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录