Ferramentas e equipamentos

Cyclone 110 mm STL Models for Dust Separators

This collection gathers STL files for cyclone separators and related 110 mm fittings used in dust extraction. You will find adapters, lids, and pipe connections that can be printed on a common 3D printer. It helps you match a separator to a vacuum, barrel, or workshop hose without guessing at dimensions. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 47 modelos de 8 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 10/10/2026

Ver a coleção Mostrar todos: 181587 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 181587 modelos
Sobre a categoria

«Cyclone 110 mm STL Models for Dust Separators»

Cyclone parts in this size range usually fall into separator bodies, lid and barrel adapters, and hose or pipe connectors. Some are designed around a specific container thread or rim, while others are open for a custom lid or drum. There are also smaller cyclonic filters and exhaust or fan transitions that use the same nominal diameter.

When choosing a model, check the stated inlet and outlet diameters, the wall thickness, and how the parts join. Look at whether the author expects supports, screws, gaskets, or glue, and which filament and layer height are listed. Photos of real prints can show how the threads and tapers fit in practice.

To refine the search, try synonyms such as dust separator, sawdust extractor, cyclonic filter, and vacuum adapter. Related terms include 100 mm reducer, pipe clip, barrel lid, and workshop dust collection. Combining those terms with the diameter you need usually narrows the results to parts that match your setup.

FAQ

Perguntas frequentes

What is a 110 mm cyclone used for?
It is a separator that uses a vortex to drop dust and chips out of an air stream before they reach a vacuum or extractor. The 110 mm size usually refers to the main pipe or hose connection.
How do I know which adapter fits my container?
Check the container opening, thread, and rim dimensions, then compare them with the model's stated measurements. A printed test ring or a short section can help confirm the fit.
Do cyclone separators need supports when printed?
It depends on the geometry: overhangs inside the cone and around ports may need supports or a different print orientation. The author's page often notes the intended orientation and support use.
Can I scale a 110 mm cyclone model to another diameter?
Scaling changes wall thickness and thread fit, so it may not match standard pipes. It is usually better to look for a model already drawn for your target diameter.
Relacionados
Busca geral

Cyclone 3D Models for Dust Collectors and More

13382 modelos
Ferramentas e equipamentos

Cyclone Nozzle 3D Models for Dust and Airflow

23232 modelos
Ferramentas e equipamentos

Cyclone Filter STL Models for Dust Separation

15950 modelos
Ferramentas e equipamentos

Cyclone Bucket Separator STL Models for Dust Collection

8525 modelos
Peças para impressoras

3D Models for 110 mm Air Filter Adapters

37686 modelos
Ciência e educação

Cyclone Dust Separator STL Models for 3D Printing

1429 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias