工具与设备

Cyclone Bucket Separator STL Models for Dust Collection

This collection gathers STL parts built around a bucket used as a dust container for a cyclone separator. It covers lids, adapters, reinforcement rings and small fittings that connect a vacuum hose to the bucket. The parts are meant for 3D printing, so you can match a separator to the bucket and hose you already have. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 46个模型 来自5个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月11日

查看合集 查看全部8525个模型 →
合集

从这里开始

合集中的全部模型

查看全部8525个模型
关于此分类

«Cyclone Bucket Separator STL Models for Dust Collection»

The models fall into a few groups. Some are complete lids that hold a cyclone on top of a bucket, others are adapters that join a separator to a specific bucket opening or hose diameter. There are also stiffening rings and spacers that sit around the rim or under the lid, plus small ports and flanges that form the air inlet and outlet.

When choosing a part, read the author's page for the bucket size and rim type, the hose or pipe diameter, and the wall thickness of the printed piece. Check how many separate parts are involved and whether they need fasteners, seals or glue. Look at the material and settings the author lists, and at photos of real prints, since thin walls and large flat lids behave differently depending on the filament and orientation.

If the results feel narrow, try related wording: dust separator, dust collector, chip separator, bucket lid, hose adapter, or the pipe diameter you use. Combining a separator term with a container term usually brings up more options, and browsing the fittings and printer-parts categories can surface small connectors that the main search misses.

FAQ

常见问题

What is a cyclone bucket separator used for?
It spins dusty air inside a cyclone body so most chips and dust drop into a bucket below, while finer particles continue to the vacuum. The printed parts hold that cyclone on the bucket and connect the hoses.
Which measurements should I take before printing a lid or adapter?
Measure the bucket rim diameter and height, the hose or pipe outer diameter, and the mounting pattern of your cyclone. Compare those with the dimensions the author lists on the model page.
Do these parts need supports?
It depends on the shape. Flat lids and rings often print without them, while overhanging ports and angled inlets may need them. The author's page usually states the orientation and support setting used.
How do I keep a thin bucket from collapsing under vacuum?
Reinforcement rings, spacers and pressure-relief parts appear in this collection for that reason. Check the wall thickness and fit described by the author, and how the ring is fixed to the rim.
相关
综合搜索

Cyclone 3D Models for Dust Collectors and More

13580个模型
家居日用

Bucket 3D Models and STL Waste Bins

38394个模型
工具与设备

Cyclone Nozzle 3D Models for Dust and Airflow

24116个模型
工具与设备

Cyclone Filter STL Models for Dust Separation

16887个模型
工具与设备

Cyclone 110 mm STL Models for Dust Separators

181587个模型
工具与设备

Dust Extraction for Buckets: 3D Models and STL Files

33698个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录