Miniaturas y wargames

ELRS Antenna Mounts for FPV Frames: 3D Models & STL

This collection gathers 3D-printable holders that carry an ELRS antenna, a GPS module or both on an FPV frame. Most designs are shaped around a specific frame family, so the mounting holes and angles differ from one model to the next. It is useful when you are planning a 3D printing job and want to see which mounting positions other builders have already worked out. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 4 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 13/10/2026

Ver la colección Mostrar todos: 1012 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 1012 modelos
Sobre la categoría

«ELRS Antenna Mounts for FPV Frames: 3D Models & STL»

The models fall into a few groups. Front and bumper mounts place the antenna ahead of the camera cage, while rear mounts often combine the antenna with a power connector or a second antenna. A separate group pairs a GPS module with an antenna holder on the same bracket, and another set is drawn for one frame family only, with holes matched to that plate layout. A few results are unrelated brackets that happen to share the wording, such as speaker or VESA mounts.

Before printing, open the model page and read what the author lists. Check the antenna or module diameter the holder accepts, the screw spacing and plate thickness it assumes, whether the part needs supports, and which material and settings the author used. Photos of finished prints show how the bracket sits on the frame and how much clearance it leaves for the camera, battery strap or props.

If the results look thin, try other terms for the same part: antenna holder, antenna bracket, RX mount, GPS mount, or the frame name plus mount. Related searches include VTX mounts, camera cages, and rear plates with an XT60 cutout, since these often share the same screw pattern. Combining a frame name with the module type usually narrows the list faster than a generic phrase.

FAQ

Preguntas frecuentes

What do I need to measure before printing an antenna mount?
Measure the antenna or module body diameter, the screw hole spacing on the frame plate, and the plate thickness. Compare those numbers with the dimensions the author lists on the model page.
Why do so many results mention a specific frame name?
These brackets are usually drawn to match one frame's plate layout, so the holes and angles only line up with that frame. A mount for another frame may need a different screw pattern or a small adapter.
Can a GPS holder and an antenna holder be one part?
Yes, some designs carry both on a single bracket, which keeps the wiring short and the stack tidy. Check that the combined part still clears the camera cage and the battery strap.
Which material is used for these mounts?
Authors usually state the filament they printed with and why, since stiffness and impact resistance matter on a frame that takes hits. Read that note and the layer orientation before choosing your own material.
Relacionado
Objetos

Dual RX and ELRS Mount 3D Models to Print

521723 modelos
Hogar

3D Printing Mounts: STL Wall, Desk and Holder Models

1158108 modelos
Herramientas y equipos

FPV Mount 3D Models: Camera, Antenna, GPS

525876 modelos
Temática militar

Mark 5 Mount STL Files for 3D Printing

665313 modelos
Objetos

Mark4 Drone Mount 3D Models and STL Files

664776 modelos
Electrónica

FPV Mark 4 V2 STL: Mounts, Kits and Plates

447686 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías