ミニチュア・ウォーゲーム

ELRS Antenna Mounts for FPV Frames: 3D Models & STL

This collection gathers 3D-printable holders that carry an ELRS antenna, a GPS module or both on an FPV frame. Most designs are shaped around a specific frame family, so the mounting holes and angles differ from one model to the next. It is useful when you are planning a 3D printing job and want to see which mounting positions other builders have already worked out. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 4サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月13日

コレクションを見る モデル1012件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル1012件をすべて表示
カテゴリについて

«ELRS Antenna Mounts for FPV Frames: 3D Models & STL»

The models fall into a few groups. Front and bumper mounts place the antenna ahead of the camera cage, while rear mounts often combine the antenna with a power connector or a second antenna. A separate group pairs a GPS module with an antenna holder on the same bracket, and another set is drawn for one frame family only, with holes matched to that plate layout. A few results are unrelated brackets that happen to share the wording, such as speaker or VESA mounts.

Before printing, open the model page and read what the author lists. Check the antenna or module diameter the holder accepts, the screw spacing and plate thickness it assumes, whether the part needs supports, and which material and settings the author used. Photos of finished prints show how the bracket sits on the frame and how much clearance it leaves for the camera, battery strap or props.

If the results look thin, try other terms for the same part: antenna holder, antenna bracket, RX mount, GPS mount, or the frame name plus mount. Related searches include VTX mounts, camera cages, and rear plates with an XT60 cutout, since these often share the same screw pattern. Combining a frame name with the module type usually narrows the list faster than a generic phrase.

FAQ

よくある質問

What do I need to measure before printing an antenna mount?
Measure the antenna or module body diameter, the screw hole spacing on the frame plate, and the plate thickness. Compare those numbers with the dimensions the author lists on the model page.
Why do so many results mention a specific frame name?
These brackets are usually drawn to match one frame's plate layout, so the holes and angles only line up with that frame. A mount for another frame may need a different screw pattern or a small adapter.
Can a GPS holder and an antenna holder be one part?
Yes, some designs carry both on a single bracket, which keeps the wiring short and the stack tidy. Check that the combined part still clears the camera cage and the battery strap.
Which material is used for these mounts?
Authors usually state the filament they printed with and why, since stiffness and impact resistance matter on a frame that takes hits. Read that note and the layer orientation before choosing your own material.
関連
オブジェクト

Dual RX and ELRS Mount 3D Models to Print

モデル521723件
暮らし・日用品

3D Printing Mounts: STL Wall, Desk and Holder Models

モデル1158108件
工具・機材

FPV Mount 3D Models: Camera, Antenna, GPS

モデル525876件
ミリタリー

Mark 5 Mount STL Files for 3D Printing

モデル665313件
オブジェクト

Mark4 Drone Mount 3D Models and STL Files

モデル664776件
電子工作

FPV Mark 4 V2 STL: Mounts, Kits and Plates

モデル447686件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く