Minyatürler ve savaş oyunları

ELRS Antenna Mounts for FPV Frames: 3D Models & STL

This collection gathers 3D-printable holders that carry an ELRS antenna, a GPS module or both on an FPV frame. Most designs are shaped around a specific frame family, so the mounting holes and angles differ from one model to the next. It is useful when you are planning a 3D printing job and want to see which mounting positions other builders have already worked out. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 1012 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 1012 model
Kategori hakkında

«ELRS Antenna Mounts for FPV Frames: 3D Models & STL»

The models fall into a few groups. Front and bumper mounts place the antenna ahead of the camera cage, while rear mounts often combine the antenna with a power connector or a second antenna. A separate group pairs a GPS module with an antenna holder on the same bracket, and another set is drawn for one frame family only, with holes matched to that plate layout. A few results are unrelated brackets that happen to share the wording, such as speaker or VESA mounts.

Before printing, open the model page and read what the author lists. Check the antenna or module diameter the holder accepts, the screw spacing and plate thickness it assumes, whether the part needs supports, and which material and settings the author used. Photos of finished prints show how the bracket sits on the frame and how much clearance it leaves for the camera, battery strap or props.

If the results look thin, try other terms for the same part: antenna holder, antenna bracket, RX mount, GPS mount, or the frame name plus mount. Related searches include VTX mounts, camera cages, and rear plates with an XT60 cutout, since these often share the same screw pattern. Combining a frame name with the module type usually narrows the list faster than a generic phrase.

FAQ

Sıkça sorulan sorular

What do I need to measure before printing an antenna mount?
Measure the antenna or module body diameter, the screw hole spacing on the frame plate, and the plate thickness. Compare those numbers with the dimensions the author lists on the model page.
Why do so many results mention a specific frame name?
These brackets are usually drawn to match one frame's plate layout, so the holes and angles only line up with that frame. A mount for another frame may need a different screw pattern or a small adapter.
Can a GPS holder and an antenna holder be one part?
Yes, some designs carry both on a single bracket, which keeps the wiring short and the stack tidy. Check that the combined part still clears the camera cage and the battery strap.
Which material is used for these mounts?
Authors usually state the filament they printed with and why, since stiffness and impact resistance matter on a frame that takes hits. Read that note and the layer orientation before choosing your own material.
İlgili
Nesneler

Dual RX and ELRS Mount 3D Models to Print

521723 model
Ev ve yaşam

3D Printing Mounts: STL Wall, Desk and Holder Models

1158108 model
Alet ve ekipman

FPV Mount 3D Models: Camera, Antenna, GPS

525876 model
Askeri

Mark 5 Mount STL Files for 3D Printing

665313 model
Nesneler

Mark4 Drone Mount 3D Models and STL Files

664776 model
Elektronik

FPV Mark 4 V2 STL: Mounts, Kits and Plates

447686 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç