微缩模型与战棋

ELRS Antenna Mounts for FPV Frames: 3D Models & STL

This collection gathers 3D-printable holders that carry an ELRS antenna, a GPS module or both on an FPV frame. Most designs are shaped around a specific frame family, so the mounting holes and angles differ from one model to the next. It is useful when you are planning a 3D printing job and want to see which mounting positions other builders have already worked out. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自4个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月13日

查看合集 查看全部1012个模型 →
合集

从这里开始

合集中的全部模型

查看全部1012个模型
关于此分类

«ELRS Antenna Mounts for FPV Frames: 3D Models & STL»

The models fall into a few groups. Front and bumper mounts place the antenna ahead of the camera cage, while rear mounts often combine the antenna with a power connector or a second antenna. A separate group pairs a GPS module with an antenna holder on the same bracket, and another set is drawn for one frame family only, with holes matched to that plate layout. A few results are unrelated brackets that happen to share the wording, such as speaker or VESA mounts.

Before printing, open the model page and read what the author lists. Check the antenna or module diameter the holder accepts, the screw spacing and plate thickness it assumes, whether the part needs supports, and which material and settings the author used. Photos of finished prints show how the bracket sits on the frame and how much clearance it leaves for the camera, battery strap or props.

If the results look thin, try other terms for the same part: antenna holder, antenna bracket, RX mount, GPS mount, or the frame name plus mount. Related searches include VTX mounts, camera cages, and rear plates with an XT60 cutout, since these often share the same screw pattern. Combining a frame name with the module type usually narrows the list faster than a generic phrase.

FAQ

常见问题

What do I need to measure before printing an antenna mount?
Measure the antenna or module body diameter, the screw hole spacing on the frame plate, and the plate thickness. Compare those numbers with the dimensions the author lists on the model page.
Why do so many results mention a specific frame name?
These brackets are usually drawn to match one frame's plate layout, so the holes and angles only line up with that frame. A mount for another frame may need a different screw pattern or a small adapter.
Can a GPS holder and an antenna holder be one part?
Yes, some designs carry both on a single bracket, which keeps the wiring short and the stack tidy. Check that the combined part still clears the camera cage and the battery strap.
Which material is used for these mounts?
Authors usually state the filament they printed with and why, since stiffness and impact resistance matter on a frame that takes hits. Read that note and the layer orientation before choosing your own material.
相关
物品

Dual RX and ELRS Mount 3D Models to Print

521723个模型
家居日用

3D Printing Mounts: STL Wall, Desk and Holder Models

1158108个模型
工具与设备

FPV Mount 3D Models: Camera, Antenna, GPS

525876个模型
军事

Mark 5 Mount STL Files for 3D Printing

665313个模型
物品

Mark4 Drone Mount 3D Models and STL Files

664776个模型
电子产品

FPV Mark 4 V2 STL: Mounts, Kits and Plates

447686个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录