Arte y decoración

Vase and Planter 3D Models: STL Files for 3D Printing

This collection gathers 3D models for vases, planters and small pots, from spiral and geometric shapes to low-poly planters and self-watering designs. It is useful when you want a container for a plant, a decorative piece or a small holder and prefer to print it yourself. Each entry leads to the author's page, where the STL files and printing notes are published. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 7 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 13/10/2026

Ver la colección Mostrar todos: 85704 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 85704 modelos
Sobre la categoría

«Vase and Planter 3D Models: STL Files for 3D Printing»

The range splits into a few groups. Spiral and faceted vases are usually tall, thin-walled and printed in vase mode, while low-poly planters and pot covers are shorter, with flat faces and wider tops. Self-watering planters and seed starters add an inner reservoir or a wick, and novelty items such as pencil holders or shaped pots trade a plain silhouette for a recognisable figure.

Before printing, open the model page and read what the author lists: overall size and scale, wall thickness, number of parts, whether supports are needed, and the material and settings used. For anything meant to hold water or soil, check how the base and seams are modelled and whether the author shows photos of real prints. A test print at reduced scale helps confirm wall thickness and fit before committing to a full-size version.

If the results feel narrow, try related wording: planter, flower pot, cachepot, pot cover, seed starter, hydroponic, wall mount, or vase mode. Style terms such as geometric, honeycomb, origami, japandi or low poly also pull in different designs, and searching by intended use — desk, windowsill, balcony — brings up smaller or hanging variants.

Vase mode prints are quick and use little material, but they leave a single wall, so they suit dry arrangements or a separate inner container more than wet soil. Thicker-walled planters take longer and need more filament, yet they hold shape better under the weight of soil and roots. Decide first whether the object is decorative or functional, then filter the results by size and by the printing method the author describes.

FAQ

Preguntas frecuentes

What is the difference between a vase and a planter in these models?
A vase is normally a closed or narrow container for cut flowers or decoration, while a planter is wider and made to hold soil and a living plant. Many models sit between the two and can be used either way.
Can these models be printed in vase mode?
Some are designed for it, especially spiral and faceted vases, and the author usually says so on the model page. Vase mode gives a single continuous wall, so check the intended use before choosing it.
How do I scale a planter to fit a specific pot or plant?
Check the dimensions listed on the model page and scale the model in your slicer to match the pot diameter you need. Keep in mind that scaling also changes wall thickness and the fit of any separate parts.
What should I check before printing a self-watering design?
Look at how the reservoir, wick and inner basket are modelled, how many parts are involved, and whether the author notes a material or layer height. Watertightness depends on the walls and seams, so photos of finished prints are worth reviewing.
Relacionado
Hogar

Heart Vase and Planter 3D Models to Print

4617 modelos
Jardín y huerto

Wavy Vase and Planter STL Models for 3D Printing

3170 modelos
Jardín y huerto

Self-Watering Planter and Vase 3D Models

4014 modelos
Jardín y huerto

Small cachepot 3D models and STL plant pots

449231 modelos
Jardín y huerto

Planter, Pot and Vase 3D Models

117123 modelos
Hogar

Vase 3D Models: STL Files for 3D Printing

84964 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías