Hobbies y makers

RC Steering System 3D Models and STL Files

This collection gathers 3D-printable parts that make up or modify the steering of radio-controlled cars and transmitters. It covers complete steering assemblies, servo-driven units, drift angle kits and small hardware such as bearing holders. The models are shared as STL and similar files, so the exact scale and fit depend on what each author documents on the model page. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 5 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 11/10/2026

Ver la colección Mostrar todos: 61545 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 61545 modelos
Sobre la categoría

«RC Steering System 3D Models and STL Files»

Steering parts for RC fall into a few groups. Transmitter-side pieces replace or extend a wheel or thumb control, while car-side assemblies cover steering arms, knuckles and front axle components. Drift-oriented kits change the steering angle, and a further group is made of brackets, bearing holders and suspension pieces that support the steering linkage.

Before printing, compare the model against your chassis or transmitter: scale, hole spacing, shaft diameter and the number of separate parts matter more than the shape in the preview. Read what the author lists for material, layer height, walls and whether supports are needed, and look at photos of finished prints to judge how the parts fit together. Small steering components often carry load, so print orientation and infill are worth a thought.

If the first search gives too little, try related wording: steering knuckle, steering arm, bell crank, servo mount, front axle, caster block, or drift angle kit. Transmitter parts are often described as thumb steering, wheel adapter or radio wheel. Searching by chassis scale, such as 1/10 or 1/14, or by the type of car, narrows the results further.

FAQ

Preguntas frecuentes

What scale should I look for in RC steering models?
Match the scale stated by the author to your chassis, for example 1/10 or 1/14, and check the dimensions in the description. A part drawn for one scale rarely fits another without rescaling.
Do steering parts need supports when printed?
It depends on the geometry. Arms and knuckles with overhangs often need them, while flat plates may not. The author's notes usually state what the model was printed with.
Which material works for steering components?
Many people print these parts in PETG, ABS or a tough PLA blend, since they take repeated force. Check the material the author lists and adjust if your setup differs.
How do I find a steering part for my transmitter?
Search for thumb steering, radio wheel or wheel adapter together with the transmitter family name. Photos of the mounted part help confirm the shaft and screw pattern.
Relacionado
Hobbies y makers

RC 3D Models in STL: Cars, Planes, Tanks, Boats

9390 modelos
Hobbies y makers

RC 1/12 3D Models: STL Bodies and Chassis Parts

460794 modelos
Hobbies y makers

RC 1:16 3D Models: Tanks, Cars and Parts to Print

446601 modelos
Hobbies y makers

RC Numbers and Markers: 3D Models and STL Files

51028 modelos
Hobbies y makers

RC Plus 3D Models: Mounts, Bodies and Parts

4018 modelos
Hobbies y makers

RC Drive 3D Models: Jets, Gears and Shafts

56760 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías