爱好与创客

RC Steering System 3D Models and STL Files

This collection gathers 3D-printable parts that make up or modify the steering of radio-controlled cars and transmitters. It covers complete steering assemblies, servo-driven units, drift angle kits and small hardware such as bearing holders. The models are shared as STL and similar files, so the exact scale and fit depend on what each author documents on the model page. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自5个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月11日

查看合集 查看全部61545个模型 →
合集

从这里开始

合集中的全部模型

查看全部61545个模型
关于此分类

«RC Steering System 3D Models and STL Files»

Steering parts for RC fall into a few groups. Transmitter-side pieces replace or extend a wheel or thumb control, while car-side assemblies cover steering arms, knuckles and front axle components. Drift-oriented kits change the steering angle, and a further group is made of brackets, bearing holders and suspension pieces that support the steering linkage.

Before printing, compare the model against your chassis or transmitter: scale, hole spacing, shaft diameter and the number of separate parts matter more than the shape in the preview. Read what the author lists for material, layer height, walls and whether supports are needed, and look at photos of finished prints to judge how the parts fit together. Small steering components often carry load, so print orientation and infill are worth a thought.

If the first search gives too little, try related wording: steering knuckle, steering arm, bell crank, servo mount, front axle, caster block, or drift angle kit. Transmitter parts are often described as thumb steering, wheel adapter or radio wheel. Searching by chassis scale, such as 1/10 or 1/14, or by the type of car, narrows the results further.

FAQ

常见问题

What scale should I look for in RC steering models?
Match the scale stated by the author to your chassis, for example 1/10 or 1/14, and check the dimensions in the description. A part drawn for one scale rarely fits another without rescaling.
Do steering parts need supports when printed?
It depends on the geometry. Arms and knuckles with overhangs often need them, while flat plates may not. The author's notes usually state what the model was printed with.
Which material works for steering components?
Many people print these parts in PETG, ABS or a tough PLA blend, since they take repeated force. Check the material the author lists and adjust if your setup differs.
How do I find a steering part for my transmitter?
Search for thumb steering, radio wheel or wheel adapter together with the transmitter family name. Photos of the mounted part help confirm the shaft and screw pattern.
相关
爱好与创客

RC 3D Models in STL: Cars, Planes, Tanks, Boats

9390个模型
爱好与创客

RC 1/12 3D Models: STL Bodies and Chassis Parts

460794个模型
爱好与创客

RC 1:16 3D Models: Tanks, Cars and Parts to Print

446601个模型
爱好与创客

RC Numbers and Markers: 3D Models and STL Files

51028个模型
爱好与创客

RC Plus 3D Models: Mounts, Bodies and Parts

4018个模型
爱好与创客

RC Drive 3D Models: Jets, Gears and Shafts

56760个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录