Loisirs et makers

RC Steering System 3D Models and STL Files

This collection gathers 3D-printable parts that make up or modify the steering of radio-controlled cars and transmitters. It covers complete steering assemblies, servo-driven units, drift angle kits and small hardware such as bearing holders. The models are shared as STL and similar files, so the exact scale and fit depend on what each author documents on the model page. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 5 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 11/10/2026

Voir la collection Tout afficher : 61545 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 61545 modèles
À propos de la catégorie

«RC Steering System 3D Models and STL Files»

Steering parts for RC fall into a few groups. Transmitter-side pieces replace or extend a wheel or thumb control, while car-side assemblies cover steering arms, knuckles and front axle components. Drift-oriented kits change the steering angle, and a further group is made of brackets, bearing holders and suspension pieces that support the steering linkage.

Before printing, compare the model against your chassis or transmitter: scale, hole spacing, shaft diameter and the number of separate parts matter more than the shape in the preview. Read what the author lists for material, layer height, walls and whether supports are needed, and look at photos of finished prints to judge how the parts fit together. Small steering components often carry load, so print orientation and infill are worth a thought.

If the first search gives too little, try related wording: steering knuckle, steering arm, bell crank, servo mount, front axle, caster block, or drift angle kit. Transmitter parts are often described as thumb steering, wheel adapter or radio wheel. Searching by chassis scale, such as 1/10 or 1/14, or by the type of car, narrows the results further.

FAQ

Questions fréquentes

What scale should I look for in RC steering models?
Match the scale stated by the author to your chassis, for example 1/10 or 1/14, and check the dimensions in the description. A part drawn for one scale rarely fits another without rescaling.
Do steering parts need supports when printed?
It depends on the geometry. Arms and knuckles with overhangs often need them, while flat plates may not. The author's notes usually state what the model was printed with.
Which material works for steering components?
Many people print these parts in PETG, ABS or a tough PLA blend, since they take repeated force. Check the material the author lists and adjust if your setup differs.
How do I find a steering part for my transmitter?
Search for thumb steering, radio wheel or wheel adapter together with the transmitter family name. Photos of the mounted part help confirm the shaft and screw pattern.
Voir aussi
Loisirs et makers

RC 3D Models in STL: Cars, Planes, Tanks, Boats

9390 modèles
Loisirs et makers

RC 1/12 3D Models: STL Bodies and Chassis Parts

460794 modèles
Loisirs et makers

RC 1:16 3D Models: Tanks, Cars and Parts to Print

446601 modèles
Loisirs et makers

RC Numbers and Markers: 3D Models and STL Files

51028 modèles
Loisirs et makers

RC Plus 3D Models: Mounts, Bodies and Parts

4018 modèles
Loisirs et makers

RC Drive 3D Models: Jets, Gears and Shafts

56760 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories