ホビー・ものづくり

RC Steering System 3D Models and STL Files

This collection gathers 3D-printable parts that make up or modify the steering of radio-controlled cars and transmitters. It covers complete steering assemblies, servo-driven units, drift angle kits and small hardware such as bearing holders. The models are shared as STL and similar files, so the exact scale and fit depend on what each author documents on the model page. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 5サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月11日

コレクションを見る モデル61545件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル61545件をすべて表示
カテゴリについて

«RC Steering System 3D Models and STL Files»

Steering parts for RC fall into a few groups. Transmitter-side pieces replace or extend a wheel or thumb control, while car-side assemblies cover steering arms, knuckles and front axle components. Drift-oriented kits change the steering angle, and a further group is made of brackets, bearing holders and suspension pieces that support the steering linkage.

Before printing, compare the model against your chassis or transmitter: scale, hole spacing, shaft diameter and the number of separate parts matter more than the shape in the preview. Read what the author lists for material, layer height, walls and whether supports are needed, and look at photos of finished prints to judge how the parts fit together. Small steering components often carry load, so print orientation and infill are worth a thought.

If the first search gives too little, try related wording: steering knuckle, steering arm, bell crank, servo mount, front axle, caster block, or drift angle kit. Transmitter parts are often described as thumb steering, wheel adapter or radio wheel. Searching by chassis scale, such as 1/10 or 1/14, or by the type of car, narrows the results further.

FAQ

よくある質問

What scale should I look for in RC steering models?
Match the scale stated by the author to your chassis, for example 1/10 or 1/14, and check the dimensions in the description. A part drawn for one scale rarely fits another without rescaling.
Do steering parts need supports when printed?
It depends on the geometry. Arms and knuckles with overhangs often need them, while flat plates may not. The author's notes usually state what the model was printed with.
Which material works for steering components?
Many people print these parts in PETG, ABS or a tough PLA blend, since they take repeated force. Check the material the author lists and adjust if your setup differs.
How do I find a steering part for my transmitter?
Search for thumb steering, radio wheel or wheel adapter together with the transmitter family name. Photos of the mounted part help confirm the shaft and screw pattern.
関連
ホビー・ものづくり

RC 3D Models in STL: Cars, Planes, Tanks, Boats

モデル9390件
ホビー・ものづくり

RC 1/12 3D Models: STL Bodies and Chassis Parts

モデル460794件
ホビー・ものづくり

RC 1:16 3D Models: Tanks, Cars and Parts to Print

モデル446601件
ホビー・ものづくり

RC Numbers and Markers: 3D Models and STL Files

モデル51028件
ホビー・ものづくり

RC Plus 3D Models: Mounts, Bodies and Parts

モデル4018件
ホビー・ものづくり

RC Drive 3D Models: Jets, Gears and Shafts

モデル56760件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く