Personnages

Humanoid 3D Models: Robots, Figures and STL Files

This collection gathers humanoid 3D models in several directions: jointed figures and mannequins, small robots built around electronics, separate heads and hands, and character busts. It is useful when you want a body-shaped model for a desk, a drawing reference or a build that moves. Most entries are made for a 3D printer and come as STL files, sometimes with instructions from the author. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 4 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 13/10/2026

Voir la collection Tout afficher : 3718 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 3718 modèles
À propos de la catégorie

«Humanoid 3D Models: Robots, Figures and STL Files»

The models differ mainly in how they are put together. Articulated figures and mannequins are printed as a set of parts that snap or pin together, so the pose can be changed after assembly. DIY humanoid robots usually combine printed shells with servos, a microcontroller board and a battery holder, which means the printed parts are only half of the project. Heads, hands and busts are often single-piece or few-piece models, closer to a display object than a working mechanism.

Before printing, open the author's model page and read what is listed there: overall height and scale, the number of separate parts, whether supports are needed, and the material and settings the author used. For jointed models, look at the clearance between moving parts and at photos of real prints rather than renders, since small gaps can close up depending on the printer. For electronics-based robots, check which board and servo sizes the design expects, and whether any non-printed hardware is described.

If the results feel narrow, try other words for the same idea: android, cyborg, mech, action figure, articulated doll, mannequin, bust or droid. Related searches such as robot arm, robot hand, servo bracket or Raspberry Pi robot often lead to parts that fit a humanoid build. You can also search by use — drawing reference, desk figure, tabletop miniature — or by scale, since humanoid models range from small miniatures to large display pieces.

FAQ

Questions fréquentes

What scale do humanoid 3D models usually come in?
It varies widely, from small tabletop miniatures to large display figures. The author's page usually states the printed height or the scale, so compare that with your printer's build volume before starting.
Do articulated humanoid figures need supports?
It depends on the design and on how the parts are oriented. Some authors split the body so each piece prints flat, while others expect supports on overhangs. The model page and the included instructions are the place to check.
What should I verify before printing a humanoid robot?
Check which microcontroller, servos and fasteners the design expects, and how the printed parts attach to them. Also look at the part count and whether the author shows photos of an assembled build.
Can I resize a humanoid model?
Scaling is possible, but joints and clearances change with it, and small pins may become too thin or too tight. If you resize, test a single part first and adjust the fit rather than printing the whole body at once.
Voir aussi
Personnages

Wraith King 3D Models: STL Files for Printing

16245 modèles
Personnages

BJD Kid 3D Models for Doll Printing

83139 modèles
Personnages

Egyptian Sphinx 3D Models and STL Files

2074 modèles
Personnages

BJD Mini Doll 3D Models and STL Files

1853 modèles
Personnages

Cheburashka on a Stool: 3D Models and STL Files

2827 modèles
Personnages

Angelina Jolie 3D Models and STL Busts to Print

1510 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories