Personagens

Humanoid 3D Models: Robots, Figures and STL Files

This collection gathers humanoid 3D models in several directions: jointed figures and mannequins, small robots built around electronics, separate heads and hands, and character busts. It is useful when you want a body-shaped model for a desk, a drawing reference or a build that moves. Most entries are made for a 3D printer and come as STL files, sometimes with instructions from the author. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 3718 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 3718 modelos
Sobre a categoria

«Humanoid 3D Models: Robots, Figures and STL Files»

The models differ mainly in how they are put together. Articulated figures and mannequins are printed as a set of parts that snap or pin together, so the pose can be changed after assembly. DIY humanoid robots usually combine printed shells with servos, a microcontroller board and a battery holder, which means the printed parts are only half of the project. Heads, hands and busts are often single-piece or few-piece models, closer to a display object than a working mechanism.

Before printing, open the author's model page and read what is listed there: overall height and scale, the number of separate parts, whether supports are needed, and the material and settings the author used. For jointed models, look at the clearance between moving parts and at photos of real prints rather than renders, since small gaps can close up depending on the printer. For electronics-based robots, check which board and servo sizes the design expects, and whether any non-printed hardware is described.

If the results feel narrow, try other words for the same idea: android, cyborg, mech, action figure, articulated doll, mannequin, bust or droid. Related searches such as robot arm, robot hand, servo bracket or Raspberry Pi robot often lead to parts that fit a humanoid build. You can also search by use — drawing reference, desk figure, tabletop miniature — or by scale, since humanoid models range from small miniatures to large display pieces.

FAQ

Perguntas frequentes

What scale do humanoid 3D models usually come in?
It varies widely, from small tabletop miniatures to large display figures. The author's page usually states the printed height or the scale, so compare that with your printer's build volume before starting.
Do articulated humanoid figures need supports?
It depends on the design and on how the parts are oriented. Some authors split the body so each piece prints flat, while others expect supports on overhangs. The model page and the included instructions are the place to check.
What should I verify before printing a humanoid robot?
Check which microcontroller, servos and fasteners the design expects, and how the printed parts attach to them. Also look at the part count and whether the author shows photos of an assembled build.
Can I resize a humanoid model?
Scaling is possible, but joints and clearances change with it, and small pins may become too thin or too tight. If you resize, test a single part first and adjust the fit rather than printing the whole body at once.
Relacionados
Personagens

Wraith King 3D Models: STL Files for Printing

16245 modelos
Personagens

BJD Kid 3D Models for Doll Printing

83139 modelos
Personagens

Egyptian Sphinx 3D Models and STL Files

2074 modelos
Personagens

BJD Mini Doll 3D Models and STL Files

1853 modelos
Personagens

Cheburashka on a Stool: 3D Models and STL Files

2827 modelos
Personagens

Angelina Jolie 3D Models and STL Busts to Print

1510 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias