Veicoli

10-Inch FPV Propeller 3D Models and STL Files

This collection gathers 3D models built around propellers, from parametric generators that let you set diameter, pitch and blade count to fixed rotors and propeller-driven toys. It is useful if you print for FPV drones, RC planes or small mechanical experiments and want a starting point before opening the author's page. Most entries are STL files meant for a desktop 3D printer, so the differences lie in geometry and assembly rather than in the format. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Il testo di questa raccolta è in inglese; la ricerca funziona in qualsiasi lingua.

Una raccolta di Polyzon · 48 modelli da 3 siti

Come è composta questa raccolta

Polyzon compone questa raccolta a partire dai risultati di ricerca dei siti collegati. I doppioni e i modelli senza anteprima vengono rimossi, le corrispondenze deboli finiscono in fondo e il resto mantiene l’ordine dei risultati. I modelli appartengono ai rispettivi autori: verifica le condizioni sulla pagina di ciascun modello.

Criteri di selezione a cura della redazione di Polyzon · Testo aggiornato: 12/10/2026

Vedi la raccolta Mostra tutti: 8173 modelli →
Raccolta

Da dove iniziare

Tutti i modelli di questa raccolta

Mostra tutti: 8173 modelli
Informazioni sulla categoria

«10-Inch FPV Propeller 3D Models and STL Files»

The models fall into a few groups. Parametric generators produce a propeller from values you enter, which makes them handy when a specific diameter or blade number is needed. Fixed propellers are published at a stated size and pitch, often with two or more blades, and some are written for small electric planes or multirotors. A separate group covers launchers, pull copters and hovercraft parts, where the rotor spins a toy or a test rig instead of lifting an aircraft.

When choosing, read the model page rather than the thumbnail. Check the stated diameter and pitch, the number of blades, whether the hub is a separate part, and whether the author expects glue, screws or a motor shaft adapter. Look at the layer height, wall count and material the author lists, since thin blades behave differently in PLA and in a tougher filament. Photos of real prints show how the blade tips and hub came out better than a render does.

Balance and surface finish matter more than the file itself on a rotor of this size. Print blades in matched pairs or sets, keep the same orientation and settings for each, and check the hub bore against your motor or shaft before assembly. If a search returns too little, try related wording: quadcopter prop, drone rotor, RC plane airscrew, multi-blade prop, ducted fan, or parametric propeller. Adding the diameter and pitch, or the words generator and launcher, narrows the list further.

FAQ

Domande frequenti

Can a 10-inch propeller be printed on a typical desktop 3D printer?
It depends on the build volume, because a 10-inch propeller is about 254 mm across. Many printers handle that diagonally or with the blades oriented along the bed, and some models are split into sections that are joined afterwards.
What settings should I check before printing a propeller?
Look at the layer height, wall count and infill the author lists, and at the material they used. Thin blades need enough walls to stay stiff, and the hub bore has to match your motor shaft or adapter.
How do parametric propeller generators differ from fixed STL propellers?
A generator takes your inputs for diameter, pitch and blade count and produces the geometry, so you can match a specific setup. A fixed model is already shaped at one size and is quicker to slice, but it cannot be rescaled without changing its proportions.
Do printed propellers need balancing?
Yes, blades of this size are usually balanced before use, since small differences in mass show up as vibration. Printing matched blades with identical settings and checking them on a balancer is the common approach.
Correlati
Veicoli

Eight-Inch FPV Propeller 3D Models and STL Files

70771 modelli
Veicoli

10-Inch Propeller 3D Models and STL Files

4817 modelli
Hobby e maker

7-Inch FPV Propeller STL Models and Guards

50955 modelli
Hobby e maker

9-Inch FPV Propellers: 3D Models and STL Files

2166 modelli
Hobby e maker

8-Inch Propeller 3D Models and STL Files

77811 modelli
Hobby e maker

FPV Drone Propeller STL Files for 3D Printing

30411 modelli

Tutte le categorie di modelli 3D

Il catalogo completo dei temi, dalla casa alla lavorazione CNC, con ricerca su tutti i siti collegati.

Apri il catalogo delle categorie