Veículos

10-Inch FPV Propeller 3D Models and STL Files

This collection gathers 3D models built around propellers, from parametric generators that let you set diameter, pitch and blade count to fixed rotors and propeller-driven toys. It is useful if you print for FPV drones, RC planes or small mechanical experiments and want a starting point before opening the author's page. Most entries are STL files meant for a desktop 3D printer, so the differences lie in geometry and assembly rather than in the format. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 3 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 12/10/2026

Ver a coleção Mostrar todos: 8173 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 8173 modelos
Sobre a categoria

«10-Inch FPV Propeller 3D Models and STL Files»

The models fall into a few groups. Parametric generators produce a propeller from values you enter, which makes them handy when a specific diameter or blade number is needed. Fixed propellers are published at a stated size and pitch, often with two or more blades, and some are written for small electric planes or multirotors. A separate group covers launchers, pull copters and hovercraft parts, where the rotor spins a toy or a test rig instead of lifting an aircraft.

When choosing, read the model page rather than the thumbnail. Check the stated diameter and pitch, the number of blades, whether the hub is a separate part, and whether the author expects glue, screws or a motor shaft adapter. Look at the layer height, wall count and material the author lists, since thin blades behave differently in PLA and in a tougher filament. Photos of real prints show how the blade tips and hub came out better than a render does.

Balance and surface finish matter more than the file itself on a rotor of this size. Print blades in matched pairs or sets, keep the same orientation and settings for each, and check the hub bore against your motor or shaft before assembly. If a search returns too little, try related wording: quadcopter prop, drone rotor, RC plane airscrew, multi-blade prop, ducted fan, or parametric propeller. Adding the diameter and pitch, or the words generator and launcher, narrows the list further.

FAQ

Perguntas frequentes

Can a 10-inch propeller be printed on a typical desktop 3D printer?
It depends on the build volume, because a 10-inch propeller is about 254 mm across. Many printers handle that diagonally or with the blades oriented along the bed, and some models are split into sections that are joined afterwards.
What settings should I check before printing a propeller?
Look at the layer height, wall count and infill the author lists, and at the material they used. Thin blades need enough walls to stay stiff, and the hub bore has to match your motor shaft or adapter.
How do parametric propeller generators differ from fixed STL propellers?
A generator takes your inputs for diameter, pitch and blade count and produces the geometry, so you can match a specific setup. A fixed model is already shaped at one size and is quicker to slice, but it cannot be rescaled without changing its proportions.
Do printed propellers need balancing?
Yes, blades of this size are usually balanced before use, since small differences in mass show up as vibration. Printing matched blades with identical settings and checking them on a balancer is the common approach.
Relacionados
Veículos

Eight-Inch FPV Propeller 3D Models and STL Files

70771 modelos
Veículos

10-Inch Propeller 3D Models and STL Files

4817 modelos
Hobby e makers

7-Inch FPV Propeller STL Models and Guards

50955 modelos
Hobby e makers

9-Inch FPV Propellers: 3D Models and STL Files

2166 modelos
Hobby e makers

8-Inch Propeller 3D Models and STL Files

77811 modelos
Hobby e makers

FPV Drone Propeller STL Files for 3D Printing

30411 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias