Véhicules

10-Inch FPV Propeller 3D Models and STL Files

This collection gathers 3D models built around propellers, from parametric generators that let you set diameter, pitch and blade count to fixed rotors and propeller-driven toys. It is useful if you print for FPV drones, RC planes or small mechanical experiments and want a starting point before opening the author's page. Most entries are STL files meant for a desktop 3D printer, so the differences lie in geometry and assembly rather than in the format. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Le texte de cette collection est rédigé en anglais ; la recherche, elle, fonctionne dans toutes les langues.

Une collection Polyzon · 48 modèles sur 3 plateformes

Comment cette collection est composée

Polyzon compose cette collection à partir des résultats de recherche des plateformes connectées. Les doublons et les modèles sans aperçu sont retirés, les correspondances faibles sont placées à la fin, et le reste suit l’ordre de la recherche. Les modèles appartiennent à leurs auteurs : consultez les conditions sur la page de chaque modèle.

Règles de sélection : la rédaction de Polyzon · Texte mis à jour le 12/10/2026

Voir la collection Tout afficher : 8173 modèles →
Collection

Par où commencer

Tous les modèles de cette collection

Tout afficher : 8173 modèles
À propos de la catégorie

«10-Inch FPV Propeller 3D Models and STL Files»

The models fall into a few groups. Parametric generators produce a propeller from values you enter, which makes them handy when a specific diameter or blade number is needed. Fixed propellers are published at a stated size and pitch, often with two or more blades, and some are written for small electric planes or multirotors. A separate group covers launchers, pull copters and hovercraft parts, where the rotor spins a toy or a test rig instead of lifting an aircraft.

When choosing, read the model page rather than the thumbnail. Check the stated diameter and pitch, the number of blades, whether the hub is a separate part, and whether the author expects glue, screws or a motor shaft adapter. Look at the layer height, wall count and material the author lists, since thin blades behave differently in PLA and in a tougher filament. Photos of real prints show how the blade tips and hub came out better than a render does.

Balance and surface finish matter more than the file itself on a rotor of this size. Print blades in matched pairs or sets, keep the same orientation and settings for each, and check the hub bore against your motor or shaft before assembly. If a search returns too little, try related wording: quadcopter prop, drone rotor, RC plane airscrew, multi-blade prop, ducted fan, or parametric propeller. Adding the diameter and pitch, or the words generator and launcher, narrows the list further.

FAQ

Questions fréquentes

Can a 10-inch propeller be printed on a typical desktop 3D printer?
It depends on the build volume, because a 10-inch propeller is about 254 mm across. Many printers handle that diagonally or with the blades oriented along the bed, and some models are split into sections that are joined afterwards.
What settings should I check before printing a propeller?
Look at the layer height, wall count and infill the author lists, and at the material they used. Thin blades need enough walls to stay stiff, and the hub bore has to match your motor shaft or adapter.
How do parametric propeller generators differ from fixed STL propellers?
A generator takes your inputs for diameter, pitch and blade count and produces the geometry, so you can match a specific setup. A fixed model is already shaped at one size and is quicker to slice, but it cannot be rescaled without changing its proportions.
Do printed propellers need balancing?
Yes, blades of this size are usually balanced before use, since small differences in mass show up as vibration. Printing matched blades with identical settings and checking them on a balancer is the common approach.
Voir aussi
Véhicules

Eight-Inch FPV Propeller 3D Models and STL Files

70771 modèles
Véhicules

10-Inch Propeller 3D Models and STL Files

4817 modèles
Loisirs et makers

7-Inch FPV Propeller STL Models and Guards

50955 modèles
Loisirs et makers

9-Inch FPV Propellers: 3D Models and STL Files

2166 modèles
Loisirs et makers

8-Inch Propeller 3D Models and STL Files

77811 modèles
Loisirs et makers

FPV Drone Propeller STL Files for 3D Printing

30411 modèles

Toutes les catégories de modèles 3D

Le catalogue complet des thèmes, de la maison à la CNC, avec une recherche sur tous les sites connectés.

Ouvrir le catalogue des catégories