Elektronik

FPV Drone Antenna Mount 3D Models and STL Brackets

This collection gathers 3D-printable mounts for FPV drone antennas, GPS modules, and video units. You will find STL files for SMA pigtails, ELRS receivers, and frame side plates. The models help you plan antenna routing for a 3D printer build. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 2736 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2736 model
Kategori hakkında

«FPV Drone Antenna Mount 3D Models and STL Brackets»

Mounts differ by antenna type and position. Some hold a single SMA connector at the rear, while others carry an ELRS receiver antenna at the front. Combination brackets add GPS modules or digital video units, and side plates support larger frames. Universal holders use slotted holes for several antenna sizes.

On the author's model page, check the mounting hole spacing and the frame thickness the part is drawn for. Look at the number of separate pieces, how they assemble, and whether the model needs supports. The material and print settings the author lists matter because antenna mounts often take vibration and impact. Photos of real prints show how the part sits on a frame.

To narrow the results, search for the antenna type, such as SMA, VTX, ELRS, or GPS, together with the frame size. Related terms include antenna holder, bracket, pigtail mount, receiver mount, and camera mount. If you need a different layout, try rear mount, front mount, side plate, or universal support.

FAQ

Sıkça sorulan sorular

What file formats are typical for these mounts?
Listings often provide STL files, and some authors include editable formats such as STEP or 3MF. Check the files on the model page before printing.
How do I choose between a front and rear antenna mount?
It depends on where the frame has open space and how you want the antenna to sit. Front mounts keep the receiver antenna away from the video transmitter, while rear mounts often follow the stock antenna position.
Do these mounts need supports?
It varies by geometry. Flat bases and bridged holes may print without supports, while overhangs and narrow channels often need them. The author's page usually notes the intended orientation.
Can I scale a mount to fit another frame?
Scaling changes hole sizes and wall thickness, so it may not match the hardware. Check the original dimensions and adjust the model in a slicer if the author provides editable files.
İlgili
Elektronik

GEPRC Mark4 3D Printing Parts and STL Files

3037 model
Elektronik

ELRS and DIN Rail Mounts: 3D Models to Print

484548 model
Elektronik

3D Models for XT60 and Rear Drone Mounts

2698 model
Elektronik

Mark 4 V2 FPV Drone için 3D Model Montajları

1010110 model
Alet ve ekipman

ELRS anten montajı için 3D model ve STL dosyaları

507472 model
Askeri

Mark 5 SMA anten ve montaj 3D model koleksiyonu

3279 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç